旋转式三温区微流控PCR扩增平台的研制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

Q 503

基金项目:


Development of a Rotary Three-Temperature Zone Microfluidic PCR Amplification Platform
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    微流控芯片用于聚合酶链式反应(PCR)可提高检测效率和自动化程度,但目前把核酸提取、扩增、检测功能集成到一块芯片上仍比较困难,此外,微流控芯片专用PCR仪也存在温度控制不够快速、精准的问题。作者采用空间上温度循环代替时间上温度循环的设计思路,搭建了一套旋转式三温区微流控PCR扩增平台,对大肠杆菌进行核酸提取和扩增。结果表明,旋转式三温区微流控PCR扩增平台拥有较好的热均匀性和热稳定性,平台的升降温速率分别为3.5 ℃/s和2.67 ℃/s,单次循环时间为110 s。与9700型PCR仪相比,所建平台的温度控制方案更为简单、升降温速率更高、循环时间更短。本研究结果可为实现核酸提取、扩增一体化的微流控PCR设备的研发提供参考。

    Abstract:

    The use of microfluidic chips for polymerase chain reaction (PCR) can improve detection efficiency and automation. However, it is still difficult to integrate the nucleic acid extraction, amplification and detection functions into one chip. In addition, the temperature control of the special PCR instrument for microfluidic chip is not fast and accurate enough. Based on the principle of temperature cycling in space instead of temperature cycling in time, a rotary three-temperature zone microfluidic PCR amplification platform was built by the authors to extract and amplify E. coli nucleic acids. The results show that the rotary three-temperature zone microfluidic PCR amplification platform has good thermal uniformity and stability. The heating and cooling rates of the platform were 3.5 ℃/s and 2.67 ℃/s, respectively. The single cycle time is only 110 s. Compared with the 9700 PCR, the platform has a simpler temperature control scheme, higher heating and cooling rates and shorter cycle ti

    参考文献
    相似文献
    引证文献
引用本文

孔振翔,姚延禄,周新丽.旋转式三温区微流控PCR扩增平台的研制[J].食品与生物技术学报,2024,43(2):107-112.

KONG Zhen-xiang, YAO Yan-lu, ZHOU Xin-li. Development of a Rotary Three-Temperature Zone Microfluidic PCR Amplification Platform[J]. Journal of Food Science and Biotechnology,2024,43(2):107-112.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-03-15
  • 出版日期:

版权所有:《食品与生物技术学报》编辑部

地址:江苏省无锡市蠡湖大道1800号  邮政编码:214122

电话:0510-85913526  电子邮件:xbbjb@jiangnan.edu.cn

技术支持:北京勤云科技发展有限公司

微信公众号二维码

手机版网站二维码