植物甾醇脂肪酸酯的胶束催化合成研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(31071600);江苏省自然科学基金项目(BK2011155)


Synthesis of Phytosterol Fatty Acid Esters Using Micelle-Catalyst
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    植物甾醇脂肪酸酯可以通过脂肪酸和植甾醇在酸和碱的催化下直接酯化合成。为提高酯化率,采用胶束催化剂合成脂肪酸植物甾醇酯,研究了反应条件对反应的影响。研究表明,胶束催化剂十二烷基硫酸铜为合成植物甾醇脂肪酸酯的良好高效催化剂,并可回收利用。在酸醇摩尔比1.2∶1,十二烷基硫酸铜用量为植物甾醇摩尔百分比为1%,反应温度110℃,无溶剂反应4h的最佳条件下,植物甾醇的酯化率为80.7%~86.4%。

    Abstract:

    Phytosterol fatty acid esters can be synthesized by direct esterification of fatty acid with phytosterol in the presence of acidic/basic catalysts.Micelle-catalysts were used in the esterification reaction for preparation of phytosterol esters in good yields.The experimental results showed that cupric dodecyl sulfate exhibit excellent activity in this reaction,which can be recovered after the reactions and reused.The optimum reaction conditions were determined and listed as follows: molar ratio of fatty acid to phytosterols 1.2∶1and the amount of catalyst 1.0 mol % at 110 ℃ for 4 h.With this optimum coditions,the esterification rate of phytosterol esters reached at 80.7~86.4 %.

    参考文献
    相似文献
    引证文献
引用本文

贾承胜,张印,徐菁苒,何文森,王琳,张晓鸣,冯骉.植物甾醇脂肪酸酯的胶束催化合成研究[J].食品与生物技术学报,2011,30(6):894-898.

JIA Cheng-sheng, ZHANG Yin, XU Jing-ran, HE Wen-sen, WANG Lin, ZHANG Xiao-ming, FENG Biao. Synthesis of Phytosterol Fatty Acid Esters Using Micelle-Catalyst[J]. Journal of Food Science and Biotechnology,2011,30(6):894-898.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-06-17
  • 出版日期:

版权所有:《食品与生物技术学报》编辑部

地址:江苏省无锡市蠡湖大道1800号  邮政编码:214122

电话:0510-85913526  电子邮件:xbbjb@jiangnan.edu.cn

技术支持:北京勤云科技发展有限公司

微信公众号二维码

手机版网站二维码