曝气强度对膜生物反应器中胞外聚合物组成及分布的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Aeration Intensity on the Components of Extracellular Polymeric Substances and Their Distribution in Membrane Bioreactor System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以膜生物反应器处理模拟生活废水为研究体系,研究了曝气强度对系统比耗氧速率、胞外聚合物含量及分布的影响。结果表明,随着曝气强度增大,比耗氧速率增加,反应器内上清液胞外聚合物含量下降,污泥胞外聚合物含量则变化不大,且胞外聚合物组成均以多糖为主。然而,膜污染层中溶解态胞外聚合物及总胞外聚合物含量随曝气强度升高而增加,其组成以蛋白质为主。膜污染速率与污泥混合液溶解态胞外聚合物中蛋白质与多糖的比值呈正相关。

    Abstract:

    In this study,the effect of aeration intensity on specific oxygen utilization rate (SOUR),the content of extracellular polymeric substances (EPS) and their distribution during synthetic wastewater treating was investigated in membrane bioreactor (MBR) system. The results showed that SOUR was increased and the EPS content in the MBR supernatant dropped by increasing the aeration intensity,but it didn't change much in sludge. The EPS both in supernatant and sludge were dominated by polysaccharides. However,the EPS content in membrane fouling layer increased along with the aeration intensity and was mainly consisted of proteins. The membrane-fouling rate was in proportion to the proteins/polysaccharides ratio in soluble EPS of the mixed liquid.

    参考文献
    相似文献
    引证文献
引用本文

陈春梅,张君,李秀芬,王新华,任月萍.曝气强度对膜生物反应器中胞外聚合物组成及分布的影响[J].食品与生物技术学报,2015,34(9):920-925.

CHEN Chunmei, ZHANG Jun, LI Xiufen, WANG Xinhua, REN Yueping. Effect of Aeration Intensity on the Components of Extracellular Polymeric Substances and Their Distribution in Membrane Bioreactor System[J]. Journal of Food Science and Biotechnology,2015,34(9):920-925.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-28
  • 出版日期:

版权所有:《食品与生物技术学报》编辑部

地址:江苏省无锡市蠡湖大道1800号  邮政编码:214122

电话:0510-85913526  电子邮件:xbbjb@jiangnan.edu.cn

技术支持:北京勤云科技发展有限公司

微信公众号二维码

手机版网站二维码