锐孔法制备谷氨酸钠微胶囊及其缓释性的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TS202.3

基金项目:


Microencapsulation of Monosodium Glutamate by Piercing Method and Their Sustained Release in Boiling Water
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提高谷氨酸钠的缓释性,以海藻酸钠为壁材,采用锐孔法对谷氨酸钠进行微胶囊化。通过单因素试验考察了不同因素对谷氨酸钠微胶囊成型效果和包埋率影响,在正交试验的优化作用下,得到谷氨酸钠微胶囊的最佳工艺条件。结果表明:海藻酸钠质量分数2.0%、CaCl2质量分数3.0%、芯壁质量体积比2∶10、包埋温度50 ℃、针头直径0.70 mm,在该条件下,微胶囊包埋率为81.86%。最优工艺条件下制备的谷氨酸钠微胶囊呈大小均一的圆球形,无拖尾现象,质地较硬,内部结构完整性和致密性较好。缓释试验和电子鼻测定结果均表明,微胶囊在沸水中具有良好的缓释效果,缓释时间长达2 h。

    Abstract:

    In order to improve the sustained release effect of monosodium glutamate(MSG),microcapsules were prepared by piercing method with sodium alginate as wall material. The effects of different factors on the forming effect and embedding efficiency were investigated by the single factor test. Under the effect of orthogonal experiment,the optimum conditions of MSG microcapsule were obtained. The best technological conditions were sodium alginate concentration of 2.0%,CaCl2 concentration of 3.0%,core to wall material ratio of 2∶10,embedding temperature 50 ℃,and needle size of 0.70 mm. Under these conditions,the encapsulation efficiency was 81.86%. Microcapsules were spherical and uniform in size,and the structure was hard with no trailing phenomenon. In addition,the internal structure of microcapsules had good integrity and compactness. Both the results of slow release test and the electronic nose test suggested that the microcapsules exhibited a good sustained release effect in boiling water,and the sustained release time was 2 hours.

    参考文献
    相似文献
    引证文献
引用本文

吴玲玲,张慜,刘亚萍.锐孔法制备谷氨酸钠微胶囊及其缓释性的研究[J].食品与生物技术学报,2019,38(8):104-111.

WU Lingling, ZHANG Min, LIU Yaping. Microencapsulation of Monosodium Glutamate by Piercing Method and Their Sustained Release in Boiling Water[J]. Journal of Food Science and Biotechnology,2019,38(8):104-111.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-27
  • 出版日期:

版权所有:《食品与生物技术学报》编辑部

地址:江苏省无锡市蠡湖大道1800号  邮政编码:214122

电话:0510-85913526  电子邮件:xbbjb@jiangnan.edu.cn

技术支持:北京勤云科技发展有限公司

微信公众号二维码

手机版网站二维码